HOOKLOADA ENQUIRY FORM

Select your model*

DUMPLOADA ENQUIRY FORM

Select your model*

DUMPLOADA HP ENQUIRY FORM

Select your model*

HOOKLIFT SOLUTIONS ENQUIRY FORM

Select your model*

ROADGRADA ENQUIRY FORM

TRUCKLOADA ENQUIRY FORM

FLOWDRYA GREEN ENQUIRY FORM

Drying is a complex field of expertise. In order for Stronga to move your project forwards at best speed and ultimately provide you with an accurate quotation for your drying equipment, we will need certain information from you to enable us to scale the drying solution to your individual requirements.

The questions below will be asked by our technical team during the consultation period; if you could provide as much information as possible at this stage, it will enable us to ensure your project moves forwards at best speed. Thank you.

THE MATERIAL

Description and specification of the material to be dried.

Wet basis bulk density of the material to be dried.

Wet basis moisture % of the material to be dried.

Target dry % moisture of the output material you require.

Photos of the material to be dried so we can view the particle size (please include a reference object in the photo, such as a pen or coin).
Image should either be JPG or PNG and no larger than 6MB.

The m³ of material you would like to process per annum.

THE HEAT SOURCE

The heat source is a key consideration in the overall drying process. Please give us as much information as possible about your preferred fuel type / energy source for creating the hot air for drying.

Your preferred fuel type (if applicable).

Your preferred energy source (if applicable).

If your project includes residual heat, please specify the amount and form.

THE LOCATION

The location of the dryer – local conditions affect drying performance.

FLOWDRYA INTERNATIONAL ENQUIRY FORM

Drying is a complex field of expertise. In order for Stronga to move your project forwards at best speed and ultimately provide you with an accurate quotation for your drying equipment, we will need certain information from you to enable us to scale the drying solution to your individual requirements.

The questions below will be asked by our technical team during the consultation period; if you could provide as much information as possible at this stage, it will enable us to ensure your project moves forwards at best speed. Thank you.

THE MATERIAL

Description and specification of the material to be dried.

Wet basis bulk density of the material to be dried.

Wet basis moisture % of the material to be dried.

Target dry % moisture of the output material you require.

Photos of the material to be dried so we can view the particle size (please include a reference object in the photo, such as a pen or coin).
Image should either be JPG or PNG and no larger than 6MB.

The m³ of material you would like to process per annum.

THE HEAT SOURCE

The heat source is a key consideration in the overall drying process. Please give us as much information as possible about your preferred fuel type / energy source for creating the hot air for drying.

Your preferred fuel type (if applicable).

Your preferred energy source (if applicable).

If your project includes residual heat, please specify the amount and form.

THE LOCATION

The location of the dryer – local conditions affect drying performance.

DRYING STATIONS ENQUIRY FORM

Drying is a complex field of expertise. In order for Stronga to move your project forwards at best speed and ultimately provide you with an accurate quotation for your drying equipment, we will need certain information from you to enable us to scale the drying solution to your individual requirements.

The questions below will be asked by our technical team during the consultation period; if you could provide as much information as possible at this stage, it will enable us to ensure your project moves forwards at best speed. Thank you.

THE MATERIAL

Description and specification of the material to be dried.

Wet basis bulk density of the material to be dried.

Wet basis moisture % of the material to be dried.

Target dry % moisture of the output material you require.

Photos of the material to be dried so we can view the particle size (please include a reference object in the photo, such as a pen or coin).
Image should either be JPG or PNG and no larger than 6MB.

The m³ of material you would like to process per annum.

THE HEAT SOURCE

The heat source is a key consideration in the overall drying process. Please give us as much information as possible about your preferred fuel type / energy source for creating the hot air for drying.

Your preferred fuel type (if applicable).

Your preferred energy source (if applicable).

If your project includes residual heat, please specify the amount and form.

THE LOCATION

The location of the dryer – local conditions affect drying performance.

HEATEX ENQUIRY FORM

FLOWFEEDA ENQUIRY FORM

FLOWSTEAMA ENQUIRY FORM

Select your model*

Heat treatment is a complex field of expertise. In order for Stronga to move your project forwards at best speed and ultimately provide you with an accurate quotation for your in-vessel heat treatment equipment, we will need certain information from you to enable us to scale the equipment to your individual requirements.

The questions below will be asked by our technical team during the consultation period; if you could provide as much information as possible at this stage, it will enable us to ensure your project moves forwards at best speed. Thank you.

THE MATERIAL TO BE HEAT TREATED

Description and specification of the material to be heat treated.

Wet basis bulk density of the material to be heat treated.

Moisture content % of the material to be heat treated.

Photos of the material to be heat treated (please include a reference object in the photo, such as a pen or coin).
Image should either be JPG or PNG and no larger than 6MB.

The m³ of material you would like to process per annum.

Are there are any seasonal requirements to your project?